Products · Boilers & Heat Recovery
To establish the project design basis for “Fire-Tube Boilers”, confirm “Steam, feedwater and boiler fuel” and its inputs: Provide steam flow and pressure/temperature, feedwater quality, fuel type/conditions, condensate return and load cases. Final values, supply limits and acceptance criteria are recorded in approved engineering documents; no generic capacity or catalogue guarantee is assumed.
From project definition to delivery
Engineering of Fire-Tube Boilers concentrates on steam pressure and temperature, circulation, furnace or process-gas duty, feed-water quality, blowdown, pressure-part design, emissions, control range and operating flexibility. The selected configuration is verified against normal, minimum, start-up, shutdown and credible upset cases, then checked for operability, maintainability, energy use, process safety and site interfaces before the design is frozen.
The design basis for Fire-Tube Boilers is defined from service data, design conditions, and battery limits. For this equipment, Steam, feedwater and boiler fuel and Feed and thermal conditions must be completed in the datasheet and design documents; performance values and guarantees are set only after the project basis is approved.
Materials, corrosion allowance, sour-service requirements, piping classes, nozzle design, insulation, coating, supports and maintenance access are coordinated with the actual process conditions and project code hierarchy.
Control philosophy, alarms and trips, cause-and-effect logic, interlocks, start-up and shutdown sequences, safe depressurization and operator access are developed consistently from the P&IDs through functional testing.
Battery limits, tie-in points, structural loads, cabling, instrumentation, drains, vents, access routes, lifting envelopes and shipping constraints are controlled through coordinated models and interface drawings.
From project definition to delivery
Proposal quality depends on complete input data and an explicit acceptance basis. The following lists provide a practical starting point and are completed during technical clarification.
Technical Datasheet
The figures summarize a published fire-tube boiler family and its stated fuel/configuration basis. They are not universal boiler limits, a code range, or a Delham rating.
| Parameter | Published value | Reference basis | Applicability / limit |
|---|---|---|---|
| Published boiler-size range | 15–700 boiler hp | Published range across one three-pass fire-tube product family. | Boiler horsepower is a capacity convention; confirm the published rating basis and steam/hot-water model before converting to process duty. |
| Published efficiency range | 83–87% | Stated for firing natural gas or LP gas in that product family. | The public range is fuel- and configuration-specific; verify whether the quoted efficiency is combustion or thermal efficiency and the test conditions. |
| Standard pressure configuration example | 15 psig steam / 30 psig hot water | Standard configurations listed for the cited model family; higher-pressure options may exist. | Not a universal code maximum or design-pressure statement for all boilers; select the construction code and certified model for the project. |
Delham Engineering
Send the available process data, battery limits and expected document list for a technical proposal. The engineering team will identify missing information through a structured clarification register.
